Here you'll find helpful guides and service bulletins for our products in PDF format. All CETAC's service bulletins & guides are in PDF format and require Abobe Acrobat to view.  (Download Acrobat Reader)

 Laser Ablation

​Due to the nature of laser ablation systems, in order to address all safety concerns, we request that you directly contact our service department when seeking service documentation for these instruments.

Tel: 800-369-2822

Tel: 402-733-2829

Email: CETACservice@Teledyne.com

Hours of Operation

8:00 am – 5:00 pm, Monday – Friday (Central Time)​

 Automation

Software Tools
C-Term Serial [RS​-232] Terminal Prog​ram [ZIP file]
C-Term Users Guide​​
Driver ​Installation for the USB to RS-232 Adapter

General Troubleshooting
Troubleshooting and CorrectingDripping from an Autosampler Probe​​

ADX-500
Guide to Upgrading an ASX-510 Autosampler to Work with the ADX-500
ADX-500 Software Guide
Guide to Installing the Z-Drive on the ADX-500 and ASX-510
Guide to Installing the Z-Drive on the ADX-500
Service Bulletin: Replacement of the barbed diluent inlet fitting on the Cavro 3-way valve on the autodilutor
Service Bulletin: Stoppage of the Cavro syringe pump due to high back pressure on the autodilutor
Service Bulletin: Contamination in the syringe pump on the autodilutor

ASX-100
 ASX-100 Specifications
 Replacing Firmware on the ASX-100 Autosampler
 Communication with the ASX-100 Using HyperTerminal
 Guide to Replacing the Z-drive on the ASX-100

ASX-110/112FR
 Replacing the Z-Axis Home Sensor on an ASX-110FR or ASX-112FR Autosampler 
 Replacement of Z-Axis drive tubing in Cetac ASX-110/112FR Autosamplers
 Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers

ASX-130
 Guide for Installing or Replacing the Daughter Board on the CETAC ASX-130 Autosampler
 Guide for Replacing the Main Board on the ASX-130 Autosampler
 Guide to Operating a CETAC Autosampler Using HyperTerminal
 Guide to Configuring a CETAC Autosampler Using HyperTerminal
 Service Bulletin: Guide shaft corrosion
 Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers
 Guide for Installing Z-drive Assembly  
 Guide for Installing Z-drive Nylon Cable  

ASX-260
 Guide for Upgrading the Firmware on the ASX-260 Autosampler
 Guide to Replacing the Y-Axis Sensor Board on the ASX-260 Autosampler
 Guide to Operating a CETAC Autosampler Using HyperTerminal
 Guide to Configuring a CETAC Autosampler Using HyperTerminal
 Service Bulletin: Autosampler Power Connector Defective
 Service Bulletin: Guide shaft corrosion
 Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers
 Guide for Installing Z-drive Assembly  
 Guide for Installing Z-drive Nylon Cable  

ASX-500/510
 ASX-510 End-of-Life Notice
 Guide to Aligning the ASX-510 Autosampler
 Guide to Replacing the CPU Board on the ASX-510 Autosampler
 Guide to Adding a Daughter Board on the ASX-510 Autosampler
 Guide to Replacing the Firmware on the ASX-510 Autosampler
 Guide to Removing the Wiper on the ASX-510 Autosampler
 Guide to Replacing the Y-Axis Leadscrew on the ASX-510 Autosampler
 Guide to Replacing the Y-Axis Sensor Board on the ASX-510 Autosampler
 Guide to Communication with the ASX-510 Autosampler Using HyperTerminal
 Guide to Replacing the Pump (SP5211) on the ASX-510 Autosampler ​
 Guide to Replacing the Main Board and Pump (SP5220) on the ASX-510 Autosampler 
 Guide to Replacing the Main Board (SP5220A) on the ASX-510 Autosampler ​
 Guide to Replacing the X-Leadscrew and Guideshaft on the ASX-510 Autosampler
 Guide to Converting the Push/Pull Z-Drive on the ASX-510 Autosampler
 Guide to Installing the Z-Drive on the ADX-500 and ASX-510
 Guide for Replacing the Z-Axis Peek Tubing on CETAC Autosamplers
 Service Bulletin: Z drive assembly replacement on ASX-500
 Service Bulletin: Modification of ASX-500 home location flag
 Service Bulletin: Drivers for the CETAC autosamplers removed from the Evolution software in versions prior to 3.22A

ASX-520/ASX-520HS
 Service Bulletin: Daughter Board replacement for Cetac ASX-520/ASX-520HS Autosamplers
 Service Bulletin: Main Board replacement for Cetac ASX-520/ASX-520HS Autosamplers
 Service Bulletin: Pump replacement for ASX-520/ASX-520HS (SP7002A)
 Guide to Upgrading the Firmware in a Cetac ASX-520/520HS Autosampler
 Guide to Installing the Splash guard and two piece shield on the ASX-520 and ASX-520HS Autosamplers
 Service Bulletin: ASX-520 Two Piece Shield & Splash Guard
 Service Bulletin: Automation Systems Pumps
 Guide to Aligning the ASX-520 Autosampler
 Guide to Replacing the Main Board on the ASX-520 and ASX-520HS Autosamplers
 Guide to Replacing the Y-Axis Sensor Board on the ASX-520 and ASX-520HS Autosamplers
 Guide for replacing the Y-Axis Leadscrew on ASX-510 and ASX-520 Autosamplers
 Guide to Operating a CETAC Autosampler Using HyperTerminal
 Guide to Configuring a CETAC Autosampler Using HyperTerminal
 Guide to Using the Z-Drive Speed Override Tool for ASX-520HS Autosamplers
 Guide to Setting the Dip Switch for ASX-520HS Autosamplers
 Guide to Changing the Rinse Pump Speed on the ASX-520 and ASX-520HS Autosamplers
 Guide to Replacing the X-axis drive belt on the ASX-520 Autosampler 
 Service Bulletin: Elimination of "splashing" in high-speed autosamplers
 Service Bulletin: Autosampler X-Axis Sensor Board Replacement
 Service Bulletin: Autosampler Main Board Replacement
 Service Bulletin: Autosampler Power Connector Defective
 Service Bulletin: Guide shaft corrosion
 Service Bulletin: Sipper depth off by 10% in the vertical direction
 Service Bulletin: Replacement of X-axis drive belt
 Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers
 Guide for Installing Z-drive Assembly 
 Guide for Installing Z-drive Nylon Cable ​​

ASX-1400/1600/1650
ASX-1000 Series Drip Cup Spring & Washer Replacement 
APS-1650 Level Sensor Installation and Calibration
Guide to Configuring a CETAC 1xxx Series Autosampler Using HyperTerminal
Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers

ASXPRESS
ASXPRESS™ 6-Port Valve Retraining 
Configuring Autosampler Firmware Personalities ​
Driver Installation for the USB to RS-232 Adapter 

ASXPRESS PLUS
ASXPRESS™ 6-Port Valve Retraining 
Configuring ASXPRESS® PLUS Firmware Personalities 
Driver Installation for the USB to RS-232 Adapter 
Rinse connections for an ASX-1400/1600/1600 autosampler 

ENC-500
Install Gu​ide
Service Bulletin: Scratching and superficial cracking of enclosure due to cleaning chemicals.

EXR-8
Install Guide
Guide to Upgrading the ASX-500/510 for use with the EXR-8
Guide to Upgrading the ASX-520/HS for use with the EXR-8
Guide to Operating a CETAC Autosampler Using HyperTerminal
Guide to Configuring a CETAC Autosampler Using HyperTerminal
Guide to Communicating with an Extended Rack (EXR-8) Autosampler Using HyperTerminal
Guide for Installing Z-drive Assembly
Guide for Installing Z-drive Nylon Cable

​​​