Products
​​​​Request Information​​​​​​​

​​

​​​​​​​​SDX HPLD High Performance Liquid Dilution SystemAn innovative spin on proven technology

The SDX​HPLD is a simple, straight-forward automated dilution system based on the robust, industry-standard ASX-560 autosampler. It dilutes in the same way you do by hand: volume-to-volume dilution, with a highly accurate syringe pump and with unique vortex mixing.
​T​he SDXHPLD uniquely offers the following benefits:

  • Prescriptive Dilution (2x to 5000x)
    • Saves laboratory staff time and effort
    • Accurate and precise unknown sample dilution
    • Calibration standard dilution
  • Responsive and Intelligent Dilution 
    • Automated re-analysis and sample introduction for:
      • Samples exceeding calibration range
      • Samples with supressed internal standard
  • Realtime Sample Homogenization Prior to Introduction
    • Supports sample homogeneity and data integrity for matrices that may settle

The SDX High Performance Liquid Dilution is the idea solution for aqueous and acid base sample prep for your ICP and ICP-MS. If you need straight-forward, fully-integrated automated dilution for your ICP or ICP-MS, the SDX-HPLD is the ideal solution for you.

FOUR MODES OF INTELLIGENT AUTO-STANDARD DILUTION

Prescriptive Dilution
SDX_email_graphics-01.jpg

Auto-Standard Prep
The SDX can prepare your working calibration standard solutions from the same source stock standard allowing generation of linear calibration lines whilst removing the potential of manual dilution error.  Calibration standard solutions are diluted and homogenized immediately prior to analysis.  Correlation coefficients of >0.999 are routinely achieved from calibration lines generated via auto-standard preparation.

SDX_email_graphics-04.jpg

Prescriptive Dilution
Unknown samples can be diluted within the range of 2x to 5000x on a sample per sample basis.  Unknown samples can simply be transferred to sample tubes and placed in racks on the ASX-560 autosampler and the dilution factor defined in the ICP instrument operating software.  The SDX system will dilute and homogenize sample solutions immediately prior to analysis and removes the need for time-consuming and potentially error prone manual dilutions.

Responsive and Intelligent Dilution
SDX_email_graphics-03.jpg

Failed Internal Standard Dilution
Laboratory quality control protocols demand that the internal standard signal for unknown samples falls within a specific tolerance (± %) with respect to batch blank solutions.  The SDX will respond to any samples that fail to meet this requirement, re-diluting them at a greater dilution factor and re-introducing them.  This response brings the internal standard of such samples into line.

SDX_email_graphics-02.jpg 

Exceeding Calibration Range
To minimise analytical error, if a sample exhibits an analyte signal greater than that of the top calibration standard then the SDX will respond by re-diluting it at a greater dilution factor and re-introducing it.  The new dilution factor is calculated by the ICP instrument operating software to bring any such samples below the concentration of the top calibration standard.​​​

 Video

SDX Video Intro Thumbnail Thermo webinar - Power of Auto-dilution imag setup of qtegra software​​​
SDX Video Introduction

Video demonstration on the features of the SDX-High Performance Liquid Dilution System by Teledyne CETAC Technologies. No other system with vortex mixing on the market today!​

Thermo Fisher Scientific On-Demand Webcast

Watch this webinar to understand how a simple approach of auto-dilution works in conjunction with ICP (OES and MS) applications. Insights on how auto-dilution can be used in conformity with existing regulations will be provided with practical examples and applications.

Setup of the SDX in the Qtegra Software

Video tutorial on how to add auto-dilution system to the Thermo Scientific™ Qtegra™ Intelligent Scientific Data Solution™ (ISDS) Software​​​​

 Application Notes

  
  
AP-SDX-001.pdfAutomating EPA Method 200.7 using the SDXHPLD High Performance Liquid Dilution System
AP-SDX-002.pdfAutomating EPA Method 200.8 using the SDXHPLD High Performance Liquid Dilution System
PST2016_WPC_SDX.pdfPoster: Vortex Mixing Dilution System for ICP and ICP-MS
Poster_2018WPC_SDX.pdfPoster: Intelligent Dilution Systems for ICP-OES and ICP-MS
AP-SDX-003.pdfSDXHPLD High Performance Liquid Dilution System yields smaller %RSD, therefore it provides cost savings and more profitability when utilized with Precious Metals Extracts

 Specs

Specific​ation Title Specification Details
ASX-560 Dimensions 
(H x W x D)
Height: 62 cm (24") with sample probe
Width: 58 cm (22.8")
Depth: 56 cm (22") (allow space for cables and tubing)
ASX-560 Weight 13.6 kg (29.9 lbs) with vortex module
SDX Module Dimensions
(H x W x D)
Height: 25.4 cm (10")
Width: 13.2 cm (5.2")
Depth: 21.6 cm (8.5")
SDX Module Weight 4.4 kg (9.7 lbs)
Communication Interface USB or Serial (RS-232) ports
Power Requirements 100-240 VAC, 47-63 Hz, 3.33A
Options Updated Clean Enclosure
ASXPRESS PLUS Rapid Sample Introduction System​​

 Contact Us

​​Contact us using an​y of the methods below for more information on this or other Teledyne CETAC products.

Email: cetacsales@teledyne.com

Toll Free: 1-800-369-2822

International: +1 402-733-2829​​

​​​​​​​​