Products
​​​​Request Information​​​

​​APS-1650 AutosamplerThe APS-1650 Automated Preparation Station prepares off-line sample dilutions with specific intentions for use in the oil analysis industry. Before wear metals samples can be analyzed, they must be prepared by means of a relatively simple dilution (usually by a factor of ten). However, these dilutions are time consuming and carry the potential for human error.

The APS 1650 Automated Preparation Station handles this task, freeing laboratory personnel and eliminating errors. A unique CETAC designed software program provides customizable control options for the APS-1650 and runs concurrently with the ICP software on a host computer, minimizing the need for additional computer hardware. The customized control allows the user to set parameters to optimize performance based on requirements for carry over, time and rinse volume.​


Click to learn about Teledyne Pharma


Independent stirrer control to ensure proper mixing of samples, leading to more precise results. Dual independent drip cups beneath the sample and stirrer eliminate cross contamination and messy drips. ​A maximum of 90 samples are collected from a sample rack and deposited in a collection rack along with a dilutant in a specified ratio (1:1 to 1:10). The diluted samples are stirred to ensure proper mixing and accurate results.​

​ ​​​​​​​

 Literature References

Publications showing our products in use. Click column headers to filter and sort. Links to third party sites.
  
AuthorsFilter
  
  
Application
  
Analysis of Wear Metals and Additive Package Elements in New and Used Oil Using the Optima 8300 ICP-OES with Flat Plate Plasma Technology
Hilligoss
Spectroscopy Application Notebook2012Oil

 Application Notes

  
  
  
PST004.pdfPoster: An investigation in to the use of sample introduction accessories to improve organic analysis on ICP04/20/2016

 Contact Us

​​Contact us using an​y of the methods below for more information on this or other Teledyne CETAC products.

Email: cetacsales@teledyne.com

Toll Free: 1-800-369-2822

International: +1 402-733-2829​​

 Specs

Specification Title​ Specification Details
Autosampler Dimensions​​ (H x W x D) 70 cm x​​ 110 cm x 70 cm
(27.5" x 43.3" x 27.5")
Autosampler​ Weight 30 kg (66 lbs)
Syringe Module Dimensions (H x W x D) 26.7cm x 14cm x 20.3cm
 (10.5" x 5.5" x 8")
Syringe Module Weight 4.5 kg (10 lbs)
Sample Racks 45 position 2 oz and 4 oz bottles
80 and 90 position 2 mL cups
Collection Racks 80 position 15 mL (17mm x 100mm)
90 position 8 mL (13mm x 100mm)
Computer/Hardware Interfaces RS-232, USB
Power Requirements AC 100V-240V, 3.2A​​​​​​​​​​​​​​​​​​

​​​​​​​​